Kitchen cabinetry: made-to-measure supply and installation

Send the location, layout, approximate dimensions, quantities, finish preferences, appliance models and target timing, and tell us whether installation is needed. Identify decisions that remain open. An initial proposal can record assumptions and allowances, but production requires approved dimensions and selections. Quote validity, approval deadlines and the basis of delivery dates are stated for the order. An early estimate does not reserve capacity unless expressly agreed.

You can start an inquiry before you have final drawings. Share photos, a rough layout or sketch, approximate dimensions, your location, the items you need and your preferred timing. Tell us which decisions are still open and whether an architect, designer or installer is already involved. MFABER will explain what additional information is needed to assess the scope and whether design or measurement work should be included in the proposal. Preliminary information supports an initial discussion; it does not authorize fabrication or replace the final dimensional and product approvals.

The written proposal defines this. Cabinetry, countertops, sinks, taps, appliances, logistics and installation should be identified individually. Do not assume an item is included because it appears in an inspiration image.

For panel-ready appliances, include the exact model and the manufacturer’s installation requirements. Panel dimensions, weight limits, door movement, ventilation and service access need to be checked before the cabinetry details are approved. Supply of the appliance and fitting of its cabinet panel are separate scope items.

Agree the material, wood or veneer where relevant, finish process, sheen and physical sample reference. Review natural variation, lighting, grain direction and adjoining surfaces, including any existing cabinetry. A larger sample or mock-up may be useful where visual continuity matters. Record accepted variation and any revised selections before production. Screen images communicate an idea but do not make every piece of natural wood identical.

Where a continuous grain pattern is part of the design, identify its direction and the intended sequence across doors, drawers and end panels on the approved layout. A finish sample alone does not show how a complete cabinet run will align. Record which adjacent parts need to be reviewed together and how later changes or replacement pieces may affect the pattern.

A hardware substitution must be checked against the approved design before ordering or drilling, including fixing pattern, dimensions, load and compatibility. For progress photographs, sample reviews or a pre-assembly check, agree availability, purpose, cost if applicable and how changes will be recorded. These reviews do not replace field measurements, countertop templating, installation checks or final acceptance.

For a change after approval, send the requested revision before work proceeds. We confirm whether it affects drawings, materials, work already completed, price or delivery. A revised instruction is agreed in writing; changes are not assumed to be cost-free or possible at every production stage.

Tell us when the readiness date changes. Agree the revised delivery date, receiver, storage, protection, insurance responsibilities and any additional handling or charges. Check the selected product's storage and acclimation instructions. Share door and elevator dimensions, stairs and loading restrictions before dispatch; any split or field assembly needs approval. Completed fabrication does not mean the site is ready or that indefinite storage is included.

Keep the item schedule, approved drawings and samples, component references, relevant care instructions and warranty contacts. The proposal identifies required technical documents for the actual product and configuration. Record quantities and visible condition on receipt, then fit, operation and outstanding items at installation or acceptance. These are separate checks, and the agreed records support later care or warranty inquiries.

They describe related but different choices. Framed and frameless refer to the cabinet body construction. Inset and overlay describe how doors and drawer fronts sit in relation to that construction. MFABER reviews the proposed combination, clearances, hardware and usable openings for your layout. A door style photograph alone does not define the complete cabinet specification.

The project review brings together the agreed drawings, dimensions, appliance details, materials, finish samples, hardware and delivery scope. We identify who is responsible for final site measurements and record outstanding decisions. Production and delivery dates are confirmed against the accepted scope; an initial design discussion does not establish a guaranteed production slot.

That depends on the condition of the cabinet boxes and the proposed hardware and finish. Send photos of the full cabinet run, each affected front, the hinges and the existing mounting details. Label every position and distinguish finished door or drawer-front dimensions from cabinet-opening dimensions; they are not interchangeable. If a front is missing, record the opening as a reference for review rather than adding a standard allowance. The review should confirm the door style, inset or overlay arrangement, clearances, hinge preparation and which existing components can be retained. MFABER assesses the required products and any agreed installation with support from the nearest suitable region. Compatibility, appearance, scope and price are confirmed before production; a like-for-like finish match is not assumed.

Tell us where the cabinets will sit, which appliances are planned, and where panels, edges, and cutouts may be exposed to splashes, steam, or leaks. A moisture-resistant core and a finished, protected cabinet are different parts of the specification; neither should be described as waterproof without supporting product documentation. For a MFABER proposal, the selected board, finish, edge protection, hardware, and appliance installation details should be reviewed together. Confirm the applicable manufacturer instructions, required clearances, care requirements, and any limitations before production. If a product or finish changes, its suitability needs to be checked again. The agreed specification and installation scope should be recorded alongside the warranty terms for the supplied components and work.

List what you need to store, including the sizes of frequently used dishes, pots, and small appliances. Consider the route between the dishwasher, food preparation area, and storage, as well as who will use the kitchen. Compare drawers, shelves, and pull-outs by usable space and access, then check the selected hardware’s load limits and opening clearances. Send MFABER your layout and storage priorities so we can assess the cabinet package with suitable regional support. Drawer organizers and other accessories should be identified in the proposal; a cabinet’s external width does not establish its usable storage capacity.

Tell MFABER whether you want task lighting under wall cabinets, lighting inside cabinets, or lighting integrated into shelves and display areas. The proposal should identify the selected fixtures, controls and power components, their locations, and who supplies and installs each part. Cabinet details need to allow for the agreed cable routes and access to components that may require servicing or replacement. Review the proposed lighting with the finish samples where appearance matters, and confirm compatibility using the selected product documentation. Electrical design and connections must be assigned to appropriately qualified professionals for the project location. A cabinet rendering that shows lighting does not mean the lighting equipment or electrical work is included. We coordinate the agreed cabinetry scope with suitable regional support and confirm the interfaces before production.